Tin tức
Vortex Faucet
Th6
Product Overview
We currently have three (3) standard sizes for the basic Frigid-X® vortex tube – mini size (small size) using 2, 4 or 8 SCFM, the most common size (medium size) using 10, 15, 25, 30 and 40 SCFM, and large sizes use 50, 75, 100 and 150 SCFM. The large size models are used in heavy industry, but are capable of cooling down to over 10,000 BTU/hour. Vortex tubes often come with a custom “hot end”, which regulates the flow and outlet temperature of the cold end. The larger the flow to the hot end, the lower the temperature to the cold end. One important thing to note is that the cooling effect (BTU/hour) is determined by both the flow rate and the drop in temperature. So, if the cooling effect is the most important factor, the cold end outlet flow should be between 60% and 80%. If cold temperature is the most important factor, the cold end outlet air flow should be less than 50%.
All vortex tubes have a “generator,” designed to vary in size for a given flow rate. There are basically two types of generators – one for the cooling effect, and the second for restricting the flow of air out of the cold end to achieve super-low temperatures. Depending on the temperature and pressure of the incoming compressed air, cold end temperatures can be as low as minus 40 and even minus 50 degrees Fahrenheit.
Application
Cooling of electrical & electronic controls
Cool down the operator/tool
CCTV camera cooling
Cool the hot melt adhesive
Cooling the solder part
Cool down the gas sample
Heat seal cooling
Cool down the environmental chamber
How Vortex Pipe Works
Our standard Stainless Steel Vortex Hose always comes with a brass generator instead of cheap plastic, which increases product life, and endurance for applications in hot environments. height. With virtually no moving parts, the vortex tube converts compressed air to cold air at minus 50°F (minus 46°C) at one end, and hot air at the other end up to 260°F (127°C) ).
Small Vortex Vortex Tube
Small vortex tubes (sizes in the 2 – 8 SCFM range) come in two (2) versions – one comes with a custom hot end plug that can be adjusted using a screwdriver ; and the other version with “manual control knob” and a hot-head muffler built into the unit
Vortex Vortex Tube Medium Size
Medium vortex tubes (sizes in the 10 – 40 SCFM range) are also available in two (2) versions – one with a custom hot-plug that can be adjusted using a screwdriver ; and the other version with “manual control knob” and a hot-head muffler built into the unit.
For both small and medium-sized vortex tubes, the user can easily convert the screwdriver lever version to the manual version, depending on the requirements of the particular application.
Large Vortex Vortex Tube
The large vortex tubes (sizes in the 50 – 1150 SCFM range) are available in only one (1) version with a custom hot-plug that can be adjusted with a screwdriver.
RELATED ARTICLES:
For any questions that need to be answered as well as consultation and quotation, please contact the information below:
TAN HAI COMPANY LIMITED : 453B Strategist Street, Quarter 6, Tan Tao Ward, Binh Tan District, Ho Chi Minh City
Email: tanhai.automation@gmail.com Phone and zalo: Mr Trung: 0397536266